Blog

Development and Current Situation of Cathode Materials for Solid-State Batteries

May 20, 2025 Leave a message

With the rapid development of new energy vehicles and energy storage systems, solid-state batteries, as one of the important directions of next-generation battery technology, will receive more and more attention to the research and application of cathode materials.

 

As an important part of solid-state batteries, the performance of cathode materials is directly related to key indicators such as energy density, cycle life, and fast charging performance of solid-state batteries. By developing new cathode materials with high voltage and high specific capacity, the energy density of solid-state batteries will be improved.

 

At present, the battery cathode materials mainly follow the high-nickel ternary route, and are iteratively upgrading to new materials with high energy density, such as ultra-high nickel, lithium-rich manganese-based, and high-pressure spinel nickel-manganese oxide. These materials offer significant advantages in terms of energy density, voltage platform, etc., but each has its own challenges.

 

battery materials

 

High-nickel ternary materials have high energy density and good cycling performance, and are widely used in semi-solid-state and all-solid-state batteries. In particular, the gram capacity of ultra-high nickel ternary cathode materials (such as 9 series ultra-high nickel) is expected to reach about 215mAh/g, and the average voltage is stable at about 3.62V when paired with graphite anode.

 

The lithium-rich manganese-based voltage window is wide, the cycling stability under atmospheric pressure is better than that of other commercial cathodes, the high-voltage discharge specific capacity can reach more than 250mAh/g, and the energy density of the battery cell is expected to exceed 400Wh/kg, and it is a low-nickel and high-manganese cathode, and the low-watt-hour cost is comparable to that of lithium iron phosphate. However, the lithium-rich manganese-based electron conductivity is extremely low, the spinel phase transformation is prone to occur during the cycling process under high pressure, and the side reactions of the high-voltage electrode/electrolyte interface are serious, and the rate performance is poor, and the first coulombic efficiency is low ( <80%), circulating capacity and voltage attenuation, etc., which cannot be used alone in the short term, can be mixed with the existing ternary, lithium cobalt oxide, lithium iron phosphate and other cathodes to reduce the voltage, and realize commercial application as soon as possible.

 

Lithium nickel manganese oxide is a spinel structure, which is more stable than layered oxide, and has a three-dimensional Li diffusion channel with good rate performance. Lithium nickel manganese oxide uniformly replaces 25% of the manganese in lithium manganese oxide with nickel, and the working voltage is as high as 4.7V, so that the specific energy exceeds 635Wh/kg, which is close to ternary, much higher than that of lithium iron, and it is a low nickel cobalt-free binary cathode, with significant cost advantages. The difficulty of lithium nickel manganese oxide lies in the instability of the cathode interface caused by the high voltage platform of the material, which can be solved by metal doping, oxide coating, iron-lithium and ternary cathode compounding.

 

In terms of industrialization, a number of enterprises have shipped and put into practical application.

Send Inquiry