200L 160Chs All-in-One Lithium battery cell Charge Discharge Testing System for Small polymer battery & coin cell
Product Description
This battery testing system is engineered for evaluating the performance of button cells and small polymer batteries. It offers 160 independent test channels rated at 5V and 50mA, and features a four‑layer sample rack capable of accommodating up to 160 batteries at once. The built‑in testing chamber provides a 200L internal volume and maintains precise temperature control across a range of 0 to 60°C, with fluctuations held within ±0.5°C. Designed for seamless integration, the system supports networked control and connectivity while incorporating comprehensive safety protections-making it well suited for laboratory battery testing applications.
Features
|
Heat Preservation |
Outside material: High quality cold-bonded steel plate, surface spray and paint treatment Inner material: Stainless steel SUS304 Cabinet heat preservation material: Rigid polyurethane foam + glass wool (insulation thickness: 50mm) |
|
Air conditioning |
Centrifugal fan, heater, evaporator |
|
Chamber Standard Configuration |
Door: Hollow toughened glass and frame Wire hole: (with soft rubber plug) 50mm four PCS (On the rear side of the box) Caster: with foot break, 4 PCS Sample rack: 4 layers of electrical insulation sample rack,load-bearing (Uniform) 10kg/layer Light: LED light |
|
Control Panel |
Controller display screen |
|
Heater |
Stainless heating pipe Control type: SSR |
Specification
| Items | Parameter | ||
| Resolution | AD:24bit; DA:16bit | ||
| Input impedance | ≥1G Ω | ||
| Voltage | CV output range | 10mV~5V | |
| Min discharge voltage | -5V | ||
| Accuracy | ± 0.02% FS | ||
| Stability | 0. 04% of FS | ||
| Current | Output range/channel | Range1: 0.1mA; Range2: 1mA; Range3: 10mA; Range4: 50mA | |
| Minimum output current | 0.2μA | ||
| Accuracy | ± 0.02% FS | ||
| CV cut-off current | Range1: 0.1μA; Range2: 1μA; Range3: 10μA;Range4: 50μA | ||
| Stability | 0.04% FS | ||
| Power | Output power/channel | 0.25 | |
| Stability | 0. 08% of FS | ||
| Time | Current response time | <1ms ( 10%FS~90%FS) | |
| Working step time | ≤ (365*24)h/step Time format-00:00:00.000(h, m, s, ms) | ||
| Data record | Data record conditions | Min data record interval :100ms | |
| Min voltage change: 10mV | |||
| Frequency | 10Hz | ||
| Charge | Charge modes | CC, CV, CCCV, CP | |
| Cut-off condition | Voltage, Current, Time, Capacity, Energy, - ΔV | ||
| Discharge | Discharge modes | CC, CV, CCCV, CP, CR | |
| Cut-off condition | Voltage, Current, Time, Capacity, Energy | ||
| Pulse | Charge | CC, CP | |
| Discharge | CC, CP | ||
| Min pulse width | 500ms | ||
| Pulse counts | Up to 32 | ||
| Chg and Dschg switch | Supported | ||
| Cut-off condition | Voltage, Time | ||
| DCIR | Calculated DCIR values available in BTSDA | ||
| Cycle | Max cycles | 65535 | |
| Max steps | 254 | ||
| Cycle nest | 3 | ||
| Protection | Safety protection | ● Power-failure data protection ● Offline operation mode ● User-defined protection conditions, such as upper and lower limited current/voltage, delay time, temperature, etc. |
|
Product Details
Hot Tags: 200l 160chs integrated lithium battery testing system, China 200l 160chs integrated lithium battery testing system manufacturers, suppliers, pouch cell lab fabrication line, Battery Winding Machine