Simulate High Altitude And Low Pressure Test Chamber
video
Simulate High Altitude And Low Pressure Test Chamber

Simulate High Altitude And Low Pressure Test Chamber

Item Name:Simulate High Altitude and Low Pressure test Chamber
Item No.:ACEY-8004C
Order(Moq): 1 set
Compliance: CE Certified
Package: Plywood Case
Product Origin: China
Warranty: One-year warranty with lifetime support
Payment: T/T, Western Union, PayPal, Ali Trade Assurance

battery environmental test chamber Simulate High Altitude and Low Pressure test

 

Test purpose

 

Battery low pressure (high altitude) simulation test, all measured samples were tested at 11.6kPa(1.68psi) negative pressure. In high altitude simulation test, all samples were tested under low pressure.

The final result of the test was that the battery should not explode or catch fire; In addition, the battery should not smoke or leak, and the battery protection valve should not be damaged. Test other electronic and electrical products under low pressure can work normally, or be damaged.The final result of the test was that the battery should not explode or catch fire; In addition, the battery should not smoke or leak, and the battery protection valve should not be damaged. Test other electronic and electrical products under low pressure can work normally, or be damaged.

 

Chamber construction

 

1. inside size: 500(W) * 500(D) * 500(H)mm;
2. the external size about: 700(width) * 650(depth) * 1270(high)mm in kind shall prevail;
3. Interlayer: the inner box is divided into two layers, with two mesh plates;
4. can window: the door has 19mm toughened glass window, specification W300*H350mm;
5. the inner material is: 304# stainless steel industrial plate thickness is 4.0mm, internal strengthening treatment, vacuum does not deform;
6. the external material is: cold rolled steel plate, thickness of 1.2mm, powder baking paint processing; (beige white)
7. Hollow filling material: rock wool, good heat preservation effect;
8. the door sealing material is: high temperature resistant silicone strip;
9. Install movable brake casters, which can be fixed in position and pushed freely;
10. The structure of the box is connected, and the operating panel and vacuum pump are installed below the machine.

 

Power supply

1. The voltage is 220V
2. Current 9.0A
3. Total power is 2.0KW
4, circuit protection system: ground protection, fast insurance, etc.

 

Product Details

 

High Altitude and Low Pressure test Chamber
environmental chamber manufacturers
environmental chamber price
environmental chamber price

Hot Tags: simulate high altitude and low pressure test chamber, China simulate high altitude and low pressure test chamber manufacturers, suppliers, battery electronic component test device, battery microcontroller test gear, battery printed circuit board test apparatus

Send Inquiry