5V 30A 128CHS Thermostatic Prismatic Lithium Ion Cell Tester with Temperature Controller
Product Description
ACEY-BCT530-128P-25C thermostatic lithium ion battery capacity tester is used for battery performance testing and capacity grading of prismatic battery. Box type thermostatic structure, temperature uniformity inside the box 25±2℃. This lithium cell tester adopts the energy-saving technology to feed the energy released by the battery back to the power grid, so as to realize the energy-saving, efficient and reliable test process.
Product Features
- Box type thermostatic structure, temperature uniformity inside the box 25±2℃.
- Front and rear box integrated design, before and after the box for the fixture and thermostat part, the side box for the power supply part, easy maintenance.
- Box independent, each box 64 channels, divided into 4 layers, each layer 16 cells, the whole machine 128 channels.
- Single point independent, independent constant current and constant voltage source, stable and shockless. Start, stop, pause, continue and protection functions can be realized.
- Device precision 0.05%, data recording time 1 second/time, high stability.
- Four-wire test interface ensures high measurement accuracy.
- Modularized design concept, easy to maintain.
Equipment Structure
- Independent CPU board, keyboard board, the whole cabinet unified sending control, while supporting single-point start.
- Ccurrent and constant voltage control module.
- Bidirectional AC/DC inverter module.
- Motorized automatic opening clamp.
Main technical parameters
| Number of equipment channels | The whole machine has 128chs |
| External dimension | L2054mm*W940mmH2298mm(subject to actual) |
| Case color | Standard (customizable) |
| Clamp type | Flat head clamp (optional with crocodile clamp) |
| Clamp spring | 81mm |
| Support battery specifications | Length70mm-210mm;Width15-70mm;Height 80mm-230mm |
| Lug center distance 40-150mm. | |
| Channel control mode | Each channel can be started, stopped, suspended, continued and protected independently. |
| Each channel has independent constant voltage and current. Hardware control circuit | |
| The accuracy of charging current and discharging current of each channel can be calibrated automatically by software | |
| Working power supply | Three phase five wire AC380V土10%, 50Hz |
| Power factor | ≥0.99,THDu ≤2% |
| AC current distortion rate | ≤2% |
| efficiency of the whole machine | Charge≥80%, discharge≥70% |
| Power consumption work | ≤23KW |
| Equipment failure rate | <1% |
| Work environment | Temperature -10~40°C. Relative humidity 80% |
| Constant temperature function | Inside the box 25±2℃ |
| Temperature control function | The temperature reaches the preset value before running the work step process. |
| Power component protection function | 1. Grid voltage overrun protection |
| 2. Grid frequency overrun protection | |
| Heat dissipation mode | Natural wind in, upward exhaust |
| Voltage measurement range | DC 0~5V |
| Battery voltage range | Charge DC 0~4.5V; discharge DC 4.5~2V |
| Constant voltage range | DC 2~4.5V |
| Voltage accuracy | ±(0.05% reading + 0.05% full), resolution ratio 1mV |
| Voltage Control Resolution | 0.1mV |
| Voltage Sampling Resolution | 0.1mV |
| Voltage stability | ≤(±1mA) |
| Current range | Charge DC300mA~30A; Discharge DC 300mA~50A |
| Current accuracy | ±(0.05% reading + 0.05% full), resolution ratio 1mV |
| Current Control Resolution | 0.1mA |
| Current Sampling Resolution | 0.1mA |
| Current rise time (90% load) | ≤50MS |
| Channel start-up time (90% load) | ≤50MS |
| Current stability | ≤(±1mA) |
| Control mode | Computer control, can control the whole cabinet with scanning function |
| Communication mode | 485s port communication (port rate 57600)/ TCP |
| Process settings | Up to 32 steps and 256 cycles can be set |
| Charging mode | Constant current; constant pressure; constant current & pressure |
| Charging cut-off conditions | Voltage, current, time, capacity |
| Discharge mode | Permanent flow, constant power, constant resistance |
| Discharging cut-off conditions | Voltage, time, and capacity |
| Protection function | Overvoltage, undervoltage, overcurrent, undercurrent, overcapacity protection, power off protection, data breakpoint recovery |
| Time frame | 0~3000 min / step in min |
| Time accuracy | ≤±0.1% |
| Sampling inspection cycle | 1s-60s optional |
| Battery sorting | Divide according to capacity, time, open-circuit voltage, discharge platform, etc. |
| Data processing | Can record voltage, current, time, capacity etc, automatically calculate constant current charging ratio, capacity loss, discharge efficiency, average voltage, median voltage, provide data curve and cycle diagram; can output text, excel, word or mdb format data file |
Product Details





Hot Tags: thermostatic lithium ion battery capacity tester, China thermostatic lithium ion battery capacity tester manufacturers, suppliers, prismatic battery pack assembly cutter, equipment for reliable prismatic battery pack assembly, equipment for assembling prismatic battery packs, battery pack assembly tools for prismatic batteries, prismatic battery pack assembling devices, prismatic battery pack assembly setup





