4S 250A 20S 72V Lifepo4 Bms With Balance Common Port
Product Introduction
ACEY-MP30S002 is specially designed for 20S product protection board scheme; suitable for lithium batteries with different chemical properties, such as lithium ion, lithium polymer, lithium iron phosphate, etc. The protection board has strong load capacity, and the continuous discharge current can reach up to 300A.
features
1)Support20Serial cell protection;
2) Integrated hardware protection functions such as overvoltage, undervoltage, charging overcurrent, discharging overcurrent, short circuit, etc.;
3) Reserve a weak current switch to control charging and discharging;
4) The charging low temperature protection function is reserved (not used).
parameters
Basic parameters
| Cell Specifications | 20 strings of ternary battery pack |
| Interface Type | Charge and discharge at the same port |
| Recommended charging voltage | 84V |
| Operating voltage range | 55V~85V |
| Continuous charge current | ≤300A |
| Continuous discharge current | ≤300A |
| Running power consumption | ≤100uA |
| Sleep power consumption | / |
| Protection board internal resistance | In-board charge and discharge MOSIn the case of both conduction, B-Solder joint to output solder joint internal resistance≤10mR |
| Operating temperature | -30°C~75°C |
| Protective plate size | 240±1mm * 90±1mm * 25±2mm(length Width Height) |
| Plus the Z-copper bars:240±1mm*116±1mm * 25±2mm(length Width Height) |
Note:The test needs to be carried out in a room with a temperature of 25±2°C and a relative humidity of 65 +/- 20 %
Main parameters
| Function | Project | Specification | unit | ||
| minimum | Typical value | maximum value | |||
| Monomer overpressureProtect | PasspressureProtection voltage | 4.2 | 4.25 | 4.3 | V |
| Overcharge protection delay time | 500 | 1000 | 1500 | mS | |
| Overcharge protectionrecoverVoltage | 4.1 | 4.15 | 4.2 | V | |
| Monomer overdischargeProtect | Over discharge protection voltage | 2.65 | 2.75 | 2.85 | V |
| Over-discharge protection delay time | 500 | 1000 | 1500 | mS | |
| Over discharge protectionrecoverVoltage | 2.9 | 3 | 3.1 | V | |
| PassputProtect recovery conditions | disconnect the load | ||||
| ChargeOvercurrent Protection | Charge overcurrent protection value | - | - | - | A |
| Charge overcurrent delay | - | - | - | mS | |
| Charge Overcurrent Release Condition | - | ||||
| dischargeOvercurrent Protection | primary dischargeOvercurrent protection current | 1000 | 1200 | 1400 | A |
| primary dischargeovercurrent1protection delay | 50 | 100 | 200 | mS | |
| secondary dischargePassflowProtection current value | - | - | - | A | |
| secondary dischargeovercurrent2protection delay | - | - | - | mS | |
| dischargeOvercurrent Protection Recovery Conditions | disconnect the loador charge | ||||
| Short circuit protection | Short circuit protection circuit | 3200 | 4200 | 5200 | A |
| Short circuit protection delay time | 150 | 300 | 600 | uS | |
| Short circuit protection recovery | disconnect the load | ||||
| Short circuit description | Short-circuit description: short-circuit current less than the minimum value or higher than the maximum value may cause short-circuit protection to fail, and the short-circuit current exceeds 8000A, short-circuit protection is not guaranteed, and short-circuit protection testing is not recommended. | ||||
| Discharge high temperature protection | temperature protection value | 70 | 75 | 80 | °C |
| (external) | Temperature protection release value | 43 | 53 | 63 | °C |
| Discharge low temperature protection | temperature protection value | - | - | - | °C |
| (external) | Temperature protection release value | - | - | - | °C |
| Charging high temperature protection | temperature protection value | 70 | 75 | 80 | °C |
| (external) | Temperature protection release value | 43 | 53 | 63 | °C |
| Charging low temperature protection | temperature protection value | - | - | - | °C |
| (external) | Temperature protection release value | - | - | - | °C |
| FET charge and discharge high temperature protection(built-in) | temperature protection value | 80 | 85 | 90 | °C |
| Temperature protection release value | 45 | 60 | 75 | °C | |
| Equalization function | Turn-on voltage | 4.15 | 4.2 | 4.25 | V |
| Open differential pressure | - | - | - | V | |
| Balance current | 64 | 84 | 104 | mA | |
| Balanced way | - | ||||
| other instructions | none | ||||
Product Details




Hot Tags: 4s 250a 20s 72v lifepo4 bms with balance common port, China 4s 250a 20s 72v lifepo4 bms with balance common port manufacturers, suppliers




