Lab Lithium Battery Manual Coin Cell Crimper
Product Description
Coin cell crimper is applied to the production of samples for the research and development of battery materials in the laboratory for button batteries and capacitor scientific research sealing, and can also be used for small batch trial production in factories. It adopts electric mode and saves effort. It can also be used for dry powder tableting, wet powder tableting, compression molding, riveting and other operations with different molds. A set of molds for CR20 series button batteries such as CR2032, CR2025, CR2016, etc.
Specification
|
Model No. |
ACEY-BCM-1 |
|
The operating force of the hand crank is less than 5kg. |
|
|
The pressure gauge of the normal button battery packaging pressure is about 80～100kg/cm2. The machine has been adjusted before leaving the factory. If you need more pressure (pressure 200kg/cm2 about 8 tons), please consult the manufacturer. Can be adjusted later. |
|
|
Mold material imported from Japan. |
|
|
The mold is limited by a high-precision positioning ring to control the height of the battery packaging, in case the packaging pressure is too large and unstable, which may cause damage to the battery sealing. |
|
|
It has the function of preventing short circuit of battery sealing |
|
|
Structural material |
high-strength chromium steel, the surface will never rust after environmental protection plating and spraying. |
|
Dimensions |
225mm X 180mm X 335mm |
|
Weight |
30kg |
Product Details
Hot Tags: manual coin cell crimper, China manual coin cell crimper manufacturers, suppliers, coin cell lab fabrication line, Manual Coin Cell Crimper, battery lab fabrication line