5V 60A 64CHS Energy saving Prismatic Battery Cell Formation Equipment
Product Description
The ACEY-BCT560-64P prismatic battery charge-discharge analyzer performs capacity evaluation of prismatic cells through cyclic charge/discharge testing. Featuring energy recovery technology, the system offers optional alligator clip attachments for testing both aluminum-cased prismatic batteries and polymer battery cells.
Product Features
- The single point is independent, and the charging and discharging steps can be set independently for each battery test channel.
- The accuracy of the equipment is 0. 05%,the data recording time is 1s / time, and with high stability.
- The software has powerful function and friendly operation interface.
- Four wire test interface ensures high measurement accuracy.
- Modular design concept, easy to maintain.
Equipment Structure
1. Independent CPU board, double keyboard board, front and back double side operation, the whole cabinet unified transmission control;
2. 20 sets of 8-channel constant current and constant voltage control module;
3. Bidirectional AC / DC inverter module;
4. Flat head clamp, alligator clamp optional.
Main technical parameters
|
Number of equipment channels |
The whole machine has 64chs |
|
External dimension |
Length 968* width 901* height 1840 (customized version, the size is subject to the actual model |
|
Case color |
Standard gray / black (customizable) |
|
Clamp type |
Custom |
|
Clamp spring |
78.5MM |
|
Support battery specifications |
The battery range is 65-220mm in length, 20-74mm in thickness, 90-230mm in height, and 45-160mm in polar ear. Cylinder 80-20 (note: this equipment is custom designed, only one type of negative pressure forming equipment is supported) |
|
Channel control mode |
Each channel can be started, stopped, suspended, continued and protected independently. |
|
Each channel has independent constant voltage and current. Hardware control circuit |
|
|
The accuracy of charging current and discharging current of each channel can be calibrated automatically by software |
|
|
Working power supply |
Three phase five wire AC380V土10%, 50Hz |
|
Power factor |
≥0.99 |
|
AC current distortion rate |
≤2% |
|
Charging efficiency of the whole machine |
≥75% |
|
Feed conversion efficiency |
≥70% |
|
Power consumption work |
≤ 23KW |
|
Equipment failure rate |
<1% |
|
Work environment |
Temperature -10~40°C. Relative humidity 80% |
|
Heat dissipation mode |
Natural wind in, upward exhaust |
|
Voltage measurement range |
DC 0~5V |
|
Battery voltage range |
Charge DC 0~4.5V; discharge DC 4.5~2V |
|
Constant voltage range |
DC 2~4.5V |
|
Voltage accuracy |
±(0.05% reading + 0.05% full), resolution ratio 1mV |
|
Voltage stability |
≤(±1mV) |
|
Current range |
Charge DC 60mA～60A; Discharge DC 60mA～60A |
|
Current accuracy |
±(0.05% reading + 0.05% full), resolution ratio 1mV |
|
Current stability |
≤(±1mA) |
|
Negative pressure range |
(-100KPa-0)adjustable |
|
Control mode |
Computer control, can control the whole cabinet with scanning function |
|
Communication mode |
485s port communication (port rate 57600)/ TCP |
|
Process settings |
Up to 32 steps and 256 cycles can be set |
|
Charging mode |
Constant current; constant pressure; constant current & pressure |
|
Charging cut-off conditions |
Voltage, current, time, capacity, - △ v |
|
Discharge mode |
Permanent flow, constant power, constant resistance |
|
Discharging cut-off conditions |
Voltage, time, and capacity |
|
Protection function |
Overvoltage, undervoltage, overcurrent, undercurrent, overcapacity protection, power off protection, data breakpoint recovery |
|
Time frame |
0~3000 min / step in min |
|
Time accuracy |
≤±0.1% |
|
Sampling inspection cycle |
1s-60s optional |
Product Details
Hot Tags: battery cell formation equipment, China battery cell formation equipment manufacturers, suppliers, Lithium Battery Testing Equipment, prismatic cell tester